One of the most useful appliances in your home is your dishwasher. Instead of spending hours on cleaning your dishwasher by hand, a dishwasher makes your life simpler. All you need to do is load up your dishes in the washer and it’ll get the job done.

You might see foam accumulation and soap residue being stuck even if you use high quality tablets. When the dishwasher tablets are not properly dissolved, you face this issue.

If you see the same issue with your dishwasher, it is essential that you investigate and get to the root of the issue. This article will explain how to resolve this issue with your dishwasher. It is important that you promptly address this issue to ensure that your dishwasher performs optimally.

How does a dishwasher work?

It is important that you understand how a dishwasher works before your start fixing the problem. Once you understand the working, you’ll be better equipped to diagnose and fix the issue with your dishwasher. 

A dishwasher uses high pressure washer jets to clean the dishes. It mixes the detergent with clean water and the mixed water is then sprayed on the dishes. The high pressure removes the grease and dirt on the dishes. 

Hot water is sprayed on the dishes from the rotating dishwasher arms. Hot water helps in dissolving the detergent while washer jets clean the dishes.

When the wash cycle starts, detergent tablets are dropped by the detergent door. The detergent door opens at a pre-established time. When the tablets drop to  the bottom of the washer, they dissolve. The tablets mix with the water, creating a lathery texture. The drain in the washer sucks this lathery mixture which is then pumped into the spinning arms of the washer before being deployed by the washer jets. 

6 possible reasons for your dishwasher tablets not dissolving

1. Dishwasher pods not dissolving

You should keep the detergent’s dispenser area clean. If any detergent or food particles end up getting stuck there, the residue can cause the dishwasher tablets to get stuck.

Also ensure that your dispenser tray is completely dry before you put the tablets inside it. The moisture in the tray can cause the tablets to clump together.

When the cycle is about to start, load the detergent just before it does. Detergent may stick or clump together if it is kept in there for too long before the cycle starts. This makes it harder for the tablets to dissolve effectively, limiting the washer’s cleaning ability.

2. Dispenser is damaged

Your dispenser may be damaged as well. Detergent may not be released immediately in the washer if the door is faulty. Check your door and see if it isn’t opening as it should. If so, the dispenser may be damaged.

3. Spray arms are not functioning properly

If the spray arms in the washer are not working properly, water distributed in the washer is not sufficient. This causes the tablets to not dissolve properly, resulting in an inefficient cycle.

It is essential that the spray arms rotate properly. These ensure that the detergent dissolves properly allowing the dishes to be cleaned effectively

Look for any other damage or crack in the spray arms. Soap residue or food particles can block the nozzle. To clear the blockage, clean the nozzle thoroughly 

4. Pressure of water is low

Your dishes won’t be cleaned properly if the water pressure is low. This is a clear indication of water pressure being low. Moreover, ensure that the inlet pipe to the dishwasher is not damaged.

5. Water temperature is low

Inadequate water temperature may be another reason for tablets not dissolving. Hot water helps the tablets dissolve. To check if water temperature is the problem, run the wash cycle at a higher temperature cycle. If the issue still persists, we recommend that you consult an expert.

6. Detergent door is blocked

Your detergent door may be blocked by a heavy object like a pan or a pot. Your detergent tablets will not be dropped at the washer’s bottom if the door doesn’t open. This does not dissolve the tablets completely. 

Summing it all up, it is easier to fix the issue once you identify its cause. Keep your dispenser dry and clean, load tablets before you start the cycle and don’t block the door. Ensure that spray arm is not clogged, washer runs on good pressure and high temperature. Start with hot tap water as hot water plays a major role. Address all the issues discussed in this blog to fix the issue. Ensure that you practice these habits regularly to ensure your dishwasher works at its best.

We know that feeling when we come home and the pleasant smell of home-cooked food comes from the kitchen. It often happens that the kitchen is filled with smoke instead of a pleasant smell. Smoke is not healthy and even dangerous. A over-the-range hood is a must-have kitchen appliance. It quickly and efficiently cleans the air from oil fumes and burning smells while cooking. 

In this article you can learn how to extend the hoods life , to keep the air quality in good condition. 

The first and most essential thing is to unplug your range hood. 

PREPARE YOUR CLEANING TOOLS

• Baking soda 
• Gloves 
• Hot water 
• A bowl 
• Vinegar 
• Detergent ( or any other cleaning liquid) 
• Grease remover spray 
• A cleaning soft brush 
• A cleaning scrubbing brush 
• Kitchen towel 

START THE OVER-THE-RANGE HOOD CLEANING 

We recommend to place some towel on your cooking panel under the hood, to prevent any dirt coming from the range hood . 

In the next step, use the dry brush and remove the dust as much as possible from the range hood. 

CLEAN THE RANGE HOOD SURFACE 

Mix in the warm water with the soap cleaner.  Use the scrubbing brush and wipe the surface.  Spray the vinegar all over the surface and wipe it with a soft kitchen cloth; it will help to give it a good, shiny finish. 

F.Y.I. Salting lemon or lime, as well as special household chemicals, will help eliminate bad smell.

CLEAN THE FILTER 

Most people, don’t pay attention to the hood filter . We highly recommend doing this, so your hood will last you for many years.

• Carefully remove the filter according to the instructions for your exact range hood make and model. 
• Leave the filter in a sink filled with hot water and a dish cleaner soap or any grease remover. 
• Sponge gently the filter with a scrubbing brush for the both sides . After all dirt removal, leave the filter in the soapy water for 10 minutes . 
• Rinse it thoroughly with warm water, and make sure you remove all soap residue. 
• Dry the filter thoroughly using a hair dryer, and leave it outside under the sun if the weather is warm and sunny.
• Install the filter back into your hood according to the manufacturer’s instructions. 

As professionals, we suggest to come back to this process every 2-3 months. 

By following our advice, your kitchen hood will always remain on the move and will serve you for many years to come. And in the kitchen there will be only a pleasant smell and nice fresh air.

The post Dishwasher Tablet Not Dissolving? Here’s What It Means appeared first on Best Solution Appliance Repair.

What to do when you have a locked oven door?

1. Use the power button to switch off the oven and then unplug it from the switchboard. After you have done this, wait for 10 minutes. After waiting, reconnect the switch.
2. After performing the first step, set the clock’s time to the current. You may have to wait a few minutes as the clock might take time to accept new settings.
3. Check if you can open the locked oven door by pulling it.
4. You must perform some extra steps if the third step doesn’t work. Put your oven in self-cleaning mode for at least 20 minutes. 
5. After 20 minutes have passed, stop using the self-cleaning mode. You may have to be patient, as the oven requires some time to cool down. 
6. Once the oven has cooled down, try pulling your locked door or lever to see if it works.

Follow the above steps and see if they work for you. If they don’t, it may be time to call an appliance repair technician to assist you. Feel free to contact us if you need top-notch appliance repair service. However, the importance of the steps mentioned above cannot be underestimated. These may save you the effort, time, and money of calling an appliance repair technician in the first place.

Top 3 types of oven door lock mechanisms and why your oven door may be locked

There can be many reasons behind your oven door being locked. We will discuss three primary reasons below that may be causing your oven door to lock. 

There are different types of door lock components in self-cleaning ovens.

1. Heat-sensitive locking control

Some oven doors have a locking system equipped with a coiled spring to lock and unlock. When the oven warms up more than usual upon heating, it locks the door, causing further problems. 

2. Motorized design

These designs usually don’t have a handle or lever to lock or unlock. This mechanism automatically locks itself when the oven is in self-cleaning mode. 

3. Solenoid system

A solenoid system in your oven may be another reason for your oven door to be locked. The oven needs to be kept in a proper position; otherwise, it will produce a buzzing noise when locking. 

Troubleshooting basics

1. If you have been using your oven for a long time, misplacing its owner’s manual is completely understandable. Don’t panic if you encounter a situation like this. Check the model number for your oven online. You can find the model written on the oven’s inside door. 
2. After you have found the model number, look for its troubleshooting guide online. The troubleshooting guide may vary depending on the locking mechanism used in the oven. 
3. Read the guide to find out why your model number has a locked door. 
4. Look for any faulty parts in your oven. These may include the switch, locking mechanisms, cables, handles, or main board. Look thoroughly; a small bent or damaged area can sometimes lock the door. 
5. You can try unlocking your oven by pressing the clear and reset button. You must wait a minute or two for the oven to settle for every cleaning cycle. Cooling down the oven is imperative, as a heated-up oven will cause more issues in every work mode. 

If you have followed all the above steps and are still facing issues, feel free to contact us and we will immediately resolve your issue.

How to unlock the LG oven?

As per the LG’s official website, these are the steps you should follow to unlock your LG oven:

1. Open the lock manually.

For over three seconds, manually hold the clear/off button.

2. Power Cycle the Unit

Turn off the circuit breaker or unplug the unit for 5 minutes. After this, restore the power. If successful, you should hear the locking mechanism disengage and the oven door unlock.

For 5 minutes, either turn off the circuit or unplug the unit. Restore the power after this. You should hear the disengagement of the locking mechanism and the door unlock if you are successful

How to unlock the Samsung oven?

1. Allow the oven to cool down.

Your oven door will lock when the range is too hot. Hence, allow it to cool down.

2. Power on the range.

The door may also be unlocked when some models power off the range. The lock may disengage if you simply turn on the range and wait. 

3. Check if any of the buttons work.

Self Clean or Child Lock may have been recently used if the buttons do not work when the range powers off. Troubleshoot the issue first before moving on to further steps.

You can turn off the child lock through the buttons on the panel. Refer to the instruction manual or inspect the panel for instructions. 

4. For 60 seconds, power cycle the range at the circuit breaker. After this, turn it back on.

A power cycle may unlock the door if it is still locked. 

5. Request service.

If the issue is not resolved even after following all the steps, request service from the Samsung Support Centre.  Dealing with a door-locked oven can be frustrating, but if you follow the steps above, you should be able to resolve the issues. Best Solution Appliance Repair offers the best appliance repair service in the industry. Our experienced team is here to provide expert solutions for comprehensive oven repair and locked doors. Feel free to book an appointment today for efficient and reliable appliance repair.

The post How to Unlock a Locked Oven Door appeared first on Best Solution Appliance Repair.

You might be thinking, “What is a ventless dryer?”. A ventless dryer picks up the moisture from clothes by constantly recirculating air through the drum. Then, it uses a heat exchanger to condense the moisture later. It works differently than vented dryers. Vented dryers use a dryer vent to push humid air outside. We’ll discuss the differences between the two and the ventless dryers in detail later in the blog.

Choosing between a ventless or a vented dryer when installing a new one can be tedious. Weighing the pros and cons of both can be confusing. If you want to decide regarding ventless dryers in Canada, this is the blog for you. We’ve written a detailed guide below that should clear away all your confusion. It answers questions like “How does a ventless dryer work?”, “Are ventless dryers good?” and “What are the problems with ventless dryers?” in detail. Let’s begin!

How does a ventless dryer work?

A dryer that has no outside ventilation system is a ventless dryer. These are also referred to as ductless dryers. Typical dryers have a vent system that uses a vent to dispose of the moisture in the clothes. The dryers take the moisture and turn it into steam using the dryer’s heat. It then uses a ventilation hose to expel all the moisture. Ventless dryers disperse the moisture by a completely different method. These are available in one of the two types: condenser dryers and Heat pump dryers.

Condenser Dryers

The condenser dryer is the most common type of Ventless dryer in Canada today. These draw cooler air into the drawing room and then heat up the air like the ventless dryers. A heat exchanger cools the air down in contrast to exhausting it through a hose. The moisture is converted back into a liquid as the temperature drops. This condensed water is collected in a chamber and then reheated to continue the cycle. This goes on until the drying process is complete. When the cycle ends, the used water is collected in a tray, which the user can dispose of quickly.

Heat Pump Dryers

Heat pump dryers have recently become available in North America. Although these are new to the region, they have grown in popularity thanks to their ability to save energy costs. These are highly efficient and are hence preferred by many users. In these dryers, the condenser is absent. This dryer does not create any humidity or moisture in the laundry room. The heat pump in these dryers continuously cycles the heated air in the drum to achieve this.

Ventless Dryers Pros and Cons

In European homes, ventless dryers are preferred over the vented dryers. The age and size of the architecture make it unsuitable to use a vented dryer. Choosing between vented and ventless dryers can be incredibly confusing. We have given the list of pros and cons for both dryers to make the decisions more accessible for you.

Pros of Ventless vs. Vented Dryers

We’ll answer the question “Are ventless dryers good?” below. Also, we compare the dryers’ versatility, efficiency, ease of installation, and ease of installation on fabrics.

Versatility

Ventless dryers take up less space than vented dryers. Also, you don’t have to make any changes or holes in your exterior walls. Ventless dryers can be easily installed anywhere in your house without much hassle. This makes ventless dryers a perfect choice since they are very versatile. These can be an excellent choice for homeowners who have historically significant or older homes. Modifying the house in these cases is out of the question, making ventless dryers a great choice.

Efficiency

Since these dryers recycle the water used in the cycle, they use less energy. Conventional dryers use more energy than ventless dryers. This makes ventless dryers energy efficient and can significantly help lower electricity bills. These are also better for the environment.

Ease of Installation

Ventless dryers only require a power receptacle for their setup. This only needs to be either three or four prongs. Another requirement is adequate airflow around the unit. All these requirements are significantly easy to meet, making ventless dryers easy to install.

Easier on Fabrics

The lower volume of heat the ventless dryers produce is gentle on fabrics. Moreover, the smaller drum is also easy on the fabric. Hence, ventless dryers can prolong the life of your clothes.

Cons of Ventless vs. Vented Dryers- What are the problems with ventless dryers?

Limited capacity

Ventless dryers have increased drying times, and load capabilities are less. Large families that have high dryer usage may struggle with a ventless dryer. You can counter this by running the dryer more frequently and using smaller loads. However, the ventless dryer may not be cost-efficient if this is done, as the cost will go up due to frequent usage.

Bigger investment

A ventless dryer may cause cost savings in the long run, but a large initial investment is required to purchase it. A vented dryer will cost less as compared to a ventless dryer.

Increased Humidity

If your dryer is placed in a humid environment or congested space, it will cause humidity. The added moisture produced by the ventless dryer may also result in the growth of Mildew and mold. In humid environments, this can be very challenging to deal with. You may also face challenges if your pantry and laundry room share space.

Therefore, before deciding which dryer to buy, don’t forget to consider the family’s budget, space, and size.

Contact Best Solution Appliance Repair for all your Dryer Installation and repair needs.

Your house space, family size and budget determine if you will need a ventless dryer in Canada. Ease of installation, versatility, and high energy savings are some benefits of Ventless dryers. You may face issues like potential humidity, lesser capacity, and high initial costs with ventless dryers. Therefore, it is important to take all these factors into account before you make a decision. “Best Solution Appliance Repair” is here for you if you need any guidance related to Ventless dryers. Being the winner of “Homestar’s Best of Awards 2023”, we provide top-notch dryer installation and repair services. Experience the best appliance repair services in the industry by booking an appointment today.

The post Is a Ventless Dryer Right for You? Pros and Cons to Consider appeared first on Best Solution Appliance Repair.

This blog answers the question “Does putting shoes in the washing machine damage it?”. We will discuss whether you can wash your shoes in a washing machine and, if possible, how to do it. Let’s begin!

Does putting shoes in the washing machine damage it?

Let’s answer one of the most asked questions, “Can you put shoes in the washing machine.” The short answer to this question is “Yes.” However, you cannot wash soccer, hiking, or shoes with metal spikes. These can damage your washing machine and dryer and should not be washed in them. Another commonly asked question is, “Can you put sneakers in the washing machine?“. Yes, you can put sneakers in the washing machine. Just ensure that you follow all the steps and instructions in this blog. All other shoes should be safe, and you can wash them in the washing machine. If you face any problems after putting the shoes in the washer, feel free to contact our expert washer repair services.

How to Wash Shoes in a Washing Machine

Check your shoes’ labels before putting them in the washing machine. If your shoe label says they’re dryer-safe, Congratulations! You can wash them without worrying. However, if the label states the shoes are not washer or dryer-safe, don’t machine-wash them. Most shoes are made from polyester or nylon mesh. These materials are durable and are hence, safe to be used in a dryer. However, if your shoes are expensive and are made from either leather, silk, or suede, don’t wash them in the washing machine. To properly wash your shoes, follow the steps given below:

1. Remove the Shoelaces.

You can hand wash the laces or put them in the dryer. If you have a mesh bag, put your shoelaces in it. This ensures that the dryer isn’t damaged as laces often wrap around and tangle in the dryer. Hence, we recommend you hand wash the laces separately if you don’t have a mesh bag. Prevention is better than cure, so do not risk putting the shoes in the machine. If your shoelaces are extra dirty, use detergent, a small brush and wash them in warm water.

2. Remove the Insoles (If They Are Removable).

We recommend that you remove your shoe’s insoles and wash them separately. This ensures they do not absorb too much water (which can take longer to dry) and are not deformed. You will need a brush, soap, and warm water to wash the insoles separately. To wash insoles, put some baking soda on top and rub them. Leave them to dry overnight and brush off the excess baking soda in the morning. This ensures that your insoles do not smell bad and are all clean in the morning.

3. Place the Shoes in the Washer.

After you are done cleaning both the laces and the insoles, it’s time for the most important step. Having a mesh bag would be helpful in this step. If you have a mesh bag, put shoes in it and place them in the washer. This helps remove the excessive noise shoes make from banging around when washed in the washer. You can also add a few clothes or towels to remove more noise. It is also important to put clothes and towels that have already been washed a few times. This makes sure that no dye or extra color comes off from the towels and ruins the shoe color

4. Set your Washer to a Delicate Cycle with Cold Water and a Slow or No Spin Setting.

We recommend using cold water when washing your shoes in the washing machine. You can use warm water if you have washed your shoes in a cold water cycle before and they have not distorted. Use warm water if you wish to, although your shoes might have a higher risk of warping.

5. Use a Liquid Detergent.

You can use powder detergent, which can get stuck in your shoe’s crevasses or compartments. To be on the safer side, use a liquid detergent.

6. Will putting shoes in the dryer break it?

Another frequently asked question is, “Will putting shoes in the dryer break it?”. Throwing the shoes in the dryer will not break them, but it is not recommended. Putting your shoes to dry in the dryer will damage the inside glue and loosen the insoles. This will make the shoes fall apart. Also, since the shoes bang around in the dryer, the dyer’s parts can lose their integrity.

Therefore, we recommend stuffing your shoes with towels, shirts, or clean rags. This ensures that they dry faster and do not absorb the moisture as the towels and shirts absorb it. Stuffing your shoes can also ensure that they don’t get deformed or lose shape. You can also keep them in sunlight to speed up the drying process.

Putting the laces back after removing them can be a tedious and confusing. Here is a video explaining how to add laces to your shoes easily.

Summing it all up

Summing it all up, the answer to “Does putting shoes in the washing machine damage it?” is generally no, if done correctly. If you follow the above steps, you should be able to safely wash your shoes in a machine without damaging it. If you face any issues, our dedicated “Best Appliance Repair Services” team is here to support you. Offering our services 7 days a week and being the winner of “Best of Awards 2023”, we’re here to make your life easier by ensuring all your appliances run efficiently and smoothly. Feel free to contact us for expert advice and reliable repair services.

The post Does putting shoes in the washing machine damage it? appeared first on Best Solution Appliance Repair.

The sight is depressing, but we’re here to cheer you up! We will list all the potential causes of a Samsung dishwasher not draining. These should help you in Samsung dishwasher troubleshooting. Furthermore, we’ll also guide you on how to drain a Samsung dishwasher. Let’s Begin!

Reason #1: Improper installation

While installing a dishwasher may seem easy, mistakes may happen while installing. Ensure that the drain line is connected and the water inlet valves are tight enough. These two not being connected and tightened can cause theSamsung dishwasher to not clean. Furthermore, check if you have tightly secured the power cord. Also, check if the wires are connected incorrectly, as this could lead to issues with drainage. 

While you can install the dishwasher on your own, it’s best to leave it to the experts. Our qualified technicians are here support you with all your appliance installation needs. If you end up doing it yourself, ensure that you attach and connect everything firmly. 

Reason #2: Clogged filter

You could have your Samsung dishwasher clogged if water is not draining from it. The issue may be caused due to a clog in the dishwasher’s filter. The filter serves the purpose of catching any food particles while washing dishes. It is located inside the dishwasher. 

It may get clogged if you allow large items like bones to get stuck in the filter. Moreover, the buildup of particles in the filter over time can also result in clogging. As a result, you could find your Samsung dishwasher not draining. Water is unable to pass through the filter as food particles block its way. 

To see if your dishwasher has a clogged filter, open up the dishwasher and inspect for any signs of blockage. 

Reason #3: Broken float switch

Your dishwasher has a float switch that stops it from overflowing. It ensures that the water reaches a suitable level and turns off the water supply to prevent flooding. If this switch malfunctions, the dishwasher will not drain water. 

Due to overuse, these switches can become defective. Mineral deposits in the switches can also cause them to stop working. You should replace the float switch with a new one if you suspect it to be the cause of the issue. 

Reason #4: Frozen drain line

Another reason for the Samsung dishwasher not cleaning can be a frozen drain line. This occurs when water freezes after coming into contact with cold surfaces in the drain hose. As a result, water freezes and blocks the passage of water, causing drainage issues. There could be several possible reasons for the occurrence of this:

1. Pieces of ice may be coming out during a cycle or blocking the drain. The drain line may freeze as a result of freezing temperatures caused by this. 
2. You may hear strange noises from the dishwasher or pipes connected to it. This may be an indication of something being stuck inside the pipes due to ice buildup.
3. If you notice water standing after using the dryer, it may signal a frozen drain. 

Look for all the above reasons in case your dishwasher does not drain. Fixing these should help you drain your Samsung dishwasher.

How To Fix A Samsung Dishwasher That Is Not Draining?

Realizing that your Samsung dishwasher is not draining can be worrisome. However, don’t fret; this can be fixed quickly and easily. We’re here to help you drain Samsung dishwasher. All you need are the right tools, and you should be able to fix your dishwasher on your own. 

Step #1: Inspect the drain hose

Disconnect the drain hose from both sides and ensure no water is left inside it. Check and see if there is any wear and tear or damage in the hose. Also, look for any blockages the drain hose may have. If you notice any signs of wear and tear or clogging, replace the drain hose with a new one. You can easily find these at most home improvement stores. After replacing the old hose with the new one, reconnect both ends of the hose to the dishwasher. Test run your dishwasher to ensure everything works smoothly. 

Step #2: Thoroughly clean the filter

To clean the filter, you will have to remove it from the bottom of the dishwasher. Carefully examine it and look for any buildup or blockage of food particles. Hot, soapy water is recommended to clean the filter. It will help in removing any food particles or dirt that may be clogging the filter. 

After you have cleaned the filter, replace it in its original position. Check if the dishwasher is draining properly. It is highly important that you regularly check and clean the filter. Do it every few months to ensure the smooth functioning of the dishwasher. Make it a habit to clean the filter after every wash. This will increase the longevity of your Samsung Dishwasher

Here is the video link explaining how you can clean your clogged filter. Moreover, the video also goes a step beyond and talks about other ways in which you could drain Samsung dishwasher

Step #3: Make sure your drain line is not frozen

Look for any frozen areas in the dryers. Use a hair dryer or another heat source to thaw them out. Ensure that you get rid of any clogs from the drain line and make sure that water flows smoothly from sink to drainpipe. If everything else fails, feel free to get in touch with us. Our dedicated team will help you identify the position of the blockage. 

Samsung dishwasher repair and installation service at Best Solution Appliance Repair

If you encounter your Samsung dishwasher not draining, Best Solution Appliance Repair is here to help you. We provide comprehensive assistance for all your appliance repair needs. Our experienced team specializes in Samsung dishwasher repair and installation. Whether it’s improper installation, a clogged filter, a broken float switch, or a frozen drain line causing the issue, our expert team can diagnose and fix the problem promptly. As a testament to our exceptional service, we have proudly won the “HomeStars Best of Award 2023.” Contact us right now and book an appointment to experience the best appliance repair services in the industry!

The post Possible Reasons Your Samsung Dishwasher Won’t Drain appeared first on Best Solution Appliance Repair.

 Reasons for your dryer making a squeaking noise 

 Here are the top 4 reasons that may cause your dryer to make squeaking noises. 

Reason #1: Clogged lint trap 

Lint trap of the dryer can get clogged overtime and thus, should be cleaned regularly. The lint trap can get blocked with debris and lint if not cleaned after every wash. This can cause friction in the drum. As a result of this, you hear your dryer squeaking. 

Regularly clean and check the lint trap to make sure it does not get clogged. A vacuum can be super helpful here and you can use it to suck up any debris and dust around the filter mesh. Ensure that you clean the lint trap regularly. This should help you get rid of the dryer squeaking sound. Here is a short video that will guide you through the process. 

Reason #2: Dryer belt 

Issues with the dryer’s belts are a major reason for dryer squeaking. The belt wraps around the drum and helps it in tumbling and rotating your clothes when drying. When the dryer’s belt becomes overused, damaged, or worn out, it can produce a squeaking sound. To stay safer, inspect the belt’s condition regularly to ensure it works smoothly. 

Reason #3: Drum rollers 

Drum rollers help the drum in moving and rotating as it does its job. These are small, cylindrical wheels and can be found towards the back of the dryer. Just like the belt, these can get worn out or damaged due to frequent usage. These will typically generate strange or squeaking noises to indicate they are damaged. You may need to replace these when they make this noise. 

Drum rollers may become misaligned with the drum’s rotation. This will cause the dryer to produce thumping and clanging sounds. To fix these, the drum rollers may need replacement. If you want to get them replaced, our experienced team is here to assist you. 

Reason #4: Igniter issues 

Another reason for a dryer’s squeaking sound can be a problematic igniter. The igniter serves the purpose of heating the dryer. It ignites a fire and releases gas, which in turn heats up the dryer. Lint and dirt buildup can halt the effective functioning of the igniter. This decreases its ability to get as hot as it needs to be to cause the gas valve to open and start a cycle. Consequently, you hear your dryer making a squeaking noise. 

You should not take this issue lightly, as it may be a symptom of bigger problems with the dryer. This can prove to be hazardous if not checked properly. Therefore, we recommend getting it checked by a professional to prevent undesirable results. 

How To Fix A Squeaky Dryer Instructions? 

No one would want to use a dryer that constantly makes a squeaking noise. It can be annoying to hear and may point out that something is wrong with the dryer. If your dryer is making a squeaking noise, here are some ways you can try to fix it yourself. 

How do you lubricate a squeaky dryer? 

Lubricating your dryer can be the easiest solution, but it is a little short-lasting. You must remove the front panel which exposes all the motors and support wheels. A simple lubricant like WD-40 will do the job but may not be long-lasting. It could also produce a foul smell that may last a few days. The best solution for the problem is to get a bright red lubricant. These are made specifically for dryers. When using the lubricant, ensure that you lubricate the motor axial. Also, make sure to lubricate all the bearings and support wheels. 

Replace the soft pad 

This step may seem simple but can help fix the squeaking noise. First, disconnect your dryer from the wall. After this, unplug it and access the rear drum thrust bearing by removing the front panel. 

In some models, you can easily install a new soft pad by sliding out and removing the old one. You will need a screwdriver if your dryer doesn’t allow this. Remove the screws that hold the old pad in place and replace it with the new one. 

When you finish this step, reconnect your driver, and you should be good to go! Toss in some clothes, and the driver will make the squeaking noise again! 

Check the dryer belt 

Check the condition of the dryer belt first. To do this, remove the back panel of the unit. Locate the belt once you have access to the inside view. Search for any signs of damage around the belt, such as fraying or cracking fabric. If you spot a problem, the dryer belt may need replacement before you can proceed to other steps. 

Test the support wheels and bearing 

Start by ensuring that each wheel is not slipping around and is secured in its place. Do this by gently tugging each wheel. You may need to replace the wheel if you notice any wear and tear. 

Moreover, a flashlight can help spot any blockages inside the dryer. These may be causing friction in the drum when it turns. As discussed earlier, this is responsible for the dryer’s squeaking noise. Remove any clogged objects you find, and then proceed with further testing. 4 

Finally, safety must be ensured before the repair and replacement. Disconnect all power sources to minimize the risk of electrocution and then proceed. 

Summing up, while a dryer making squeaking noises can be worrisome, it can be fixed easily. Addressing common issues like clogged lint traps, worn dryer belts, damaged drum rollers, or igniter problems can help solve the issue. Ensure that you regularly check and maintain your dryer. This ensures the longevity of the dryer and helps diagnose potential problems. Seek professional help if the noise persists or you are unsure about the problem. 

Dryer Repair at Best Solution Appliance Repair 

At “Best Solution Appliance Repair”, we offer top-notch appliance repair services. We specialize in dryer repair and replacement and are here for your help. Our experienced team is here to diagnose and fix any dryer problems you face, ensuring your dryer runs smoothly again. Don’t hesitate to contact us for reliable and efficient services. We’re here to help you with all your dryer repair needs. Book an appointment now and experience the best appliance repair services in the industry. 

The post  4 Possible Reasons Your Dryer Is Making Squeaking Noise  appeared first on Best Solution Appliance Repair.

In this article you can learn how to extend the hoods life , to keep the air quality in good condition. 

The first and most essential thing is to unplug your range hood. 

PREPARE YOUR CLEANING TOOLS

• Baking soda 
• Gloves 
• Hot water 
• A bowl 
• Vinegar 
• Detergent ( or any other cleaning liquid) 
• Grease remover spray 
• A cleaning soft brush 
• A cleaning scrubbing brush 
• Kitchen towel 

START THE OVER-THE-RANGE HOOD CLEANING 

We recommend to place some towel on your cooking panel under the hood, to prevent any dirt coming from the range hood . 

In the next step, use the dry brush and remove the dust as much as possible from the range hood. 

CLEAN THE RANGE HOOD SURFACE 

Mix in the warm water with the soap cleaner.  Use the scrubbing brush and wipe the surface.  Spray the vinegar all over the surface and wipe it with a soft kitchen cloth; it will help to give it a good, shiny finish. 

F.Y.I. Salting lemon or lime, as well as special household chemicals, will help eliminate bad smell.

CLEAN THE FILTER 

Most people, don’t pay attention to the hood filter . We highly recommend doing this, so your hood will last you for many years.

• Carefully remove the filter according to the instructions for your exact range hood make and model. 
• Leave the filter in a sink filled with hot water and a dish cleaner soap or any grease remover. 
• Sponge gently the filter with a scrubbing brush for the both sides . After all dirt removal, leave the filter in the soapy water for 10 minutes . 
• Rinse it thoroughly with warm water, and make sure you remove all soap residue. 
• Dry the filter thoroughly using a hair dryer, and leave it outside under the sun if the weather is warm and sunny.
• Install the filter back into your hood according to the manufacturer’s instructions. 

As professionals, we suggest to come back to this process every 2-3 months. 

By following our advice, your kitchen hood will always remain on the move and will serve you for many years to come. And in the kitchen there will be only a pleasant smell and nice fresh air.

The post Why it is important to keep your over-the-range hood clean appeared first on Best Solution Appliance Repair.

There are a few possible reasons why it can happen.

The first reason is odour pollution.

When you have different foods in your refrigerator that are out of containers, expired food products, etc., the ice in your ice maker can easily absorb this odour.

The second reason is that the water in your refrigerator dispenser is not completely clean.

We’re here to explore both issues and how this problem can be solved.

Start by emptying everything out of your fridge and disposing of the old ice from your refrigerator drawer bin. Carefully remove the ice container from the fridge and wash it using warm water and soap detergent. Ensure the container is dry properly, and then you can return it to its place.

Get rid of the food fragrance

The refrigerator often contains open containers or plates of fruit or cut-up vegetables, for example, or food items that are not properly sealed. Ice absorbs any smell. Even if you have any food in the freezer that can spread any smell, this can also affect the ice with bad taste and smell.

We recommend cleaning your refrigerator once per month. Also, make sure to wrap any food you keep in your refrigerator correctly or keep it in closed containers. Wipe your refrigerator with clean linen from the inside.

Limited ice maker usage

If you seldom use ice, we suggest lowering the ice maker’s output or disposing of unused ice from the container. Older ice is more prone to developing an undesirable taste or smell than freshly made ice.

The water filter is expired and needs replacement

Most refrigerators have a water filter connected to the ice maker. This filter provides fresh, clean water and a great taste of ice in your ice maker. It needs to be replaced approximately every six months.

Water supply is polluted

Even if your refrigerator has a water filtration system, some impurities may remain and affect the taste of the ice. Each house has a water supply coming into the house from the underground tubes. If there is any tube issue, this water can contain chemicals and other pollution that may affect water quality. In this case, we recommend contacting the local plumber to solve this issue.

If you’ve followed all of these simple tips and your ice still tastes weird, your ice maker may need to be fixed, and you may be better off seeking professional help.

The post Ice maker ice smells or tastes terrible, what can be wrong? appeared first on Best Solution Appliance Repair.

When your dishwasher stops draining water, it’s not just a minor inconvenience. It’s a sign that something is amiss and needs your attention. Your role in maintaining the dishwasher is crucial, and understanding the severity of the issue is vital. Some problems can be quickly troubleshooted and fixed by you, while others may require the expertise of a specialist for proper repair.

We will provide a few common issues why your dishwasher is not draining properly

Overfilled dishwasher

The overfilled dishwasher can obstruct water from circulating, causing that water to stagnate in the dishwasher.

Dishwasher filter is not clean

A clogged filter is one of the most common reasons; some need to be more active to rinse the dishes. Before placing the utensils in the dishwasher, wash off any remaining food. Eventually, the machine’s filter, which is located at the very bottom, will become clogged. In this case, you need to clean the filter from pieces of food by hand and start the wash cycle again.

Dishwasher drainage mechanism problem

As we mentioned, when you do not rinse your dishes properly before sending them to the dishwasher, a small piece of food can clog the drain line, drain hose, or drain pump. Even if you rinse all your dishes well, this can happen because of a small piece of glass.

A complete blockage of the impeller and high-risk damage to the dishwasher drain pump

Impeller configuration significantly impacts pump efficiency and water compatibility. Factors such as clogging, which often occurs if a piece of glass, a napkin, or any other small object gets into the pump, can significantly affect water drainage while the dishwasher runs.

Broken dishwasher drain pump

The dishwasher pump is one of the essential components. If there is a pump, drain soapy water from the machine when the cycle goes through the cleaning process. If the pump malfunctions, your dishwasher will not clean your dishes well or stop working correctly at all.

A dishwasher is a sensitive appliance, so you should not solve the problem yourself. Suppose you need help to prevent the situation from getting worse. In that case, we recommend contacting the professionals to ensure your appliance will serve you for many years after the professional repair.

How to prevent the dishwasher drain issue in the future

• Firstly, ensure that the water in the dishwasher is adequately hot by running hot water in the kitchen sink beforehand.
• Secondly, always use dishwasher detergent and maintain the cleanliness of the dishwasher filter as per the instructions in the user manual.
• The last and essential thing is to rinse all food pieces left in the dishes.

These three important tips will help you prevent drainage issues, so don’t forget to follow these three simple instructions.

The post The dishwasher won’t drain. What could be the reason? appeared first on Best Solution Appliance Repair.

Fixing these is tedious and can be uncomfortable, especially if you use the appliance daily. You will therefore, need an expert Appliance Repair Technician to resolve the issue. 

Finding an expert Appliance repair technician in Ontario is another tedious task and we’re here to make it easier for you. Let’s get to it!

A reliable and a competent technician is a must to ensure your appliance is completely fixed. The process may be time-consuming, but trust us, it’s completely worth it. Below are a few things you should consider before choosing a technician. 

Plan Ahead

Carry out frequent maintenance checks on your home appliances. This will help you spot any appliance issues that you can address promptly.

Stay ahead of the curve by finding Ontario’s best appliance repair technicians. It’s also essential to get familiarised with their services and quotes beforehand. This will save you time and prepare you for any unforeseen malfunctions.

Take your Time

You never know what might happen the very next moment in life. The same is true with malfunctions; you never know when it will happen. 

In case of a malfunction, our brain sends us into panic mode. The trick here is to calm down, analyse the situation, and look for an appliance repair technician.

Having an emergency contact for a technician would be ideal. If you don’t have one, don’t worry; you can find one online. Search through different quotes and services and then make a decision. It’s also essential to take your time here and then decide. No one wants a technician who further ruins the situation, so choose wisely. 

How do you choose the most suitable Appliance repair technician in Ontario?

Searching Online

The internet has to be the most diverse place for anything you need. You can get information through any website you visit and see if it works for you. For example, you can type “Best Appliance Repair Technician for me in Ontario” and get many results. 

An internet search will generate a lot of results, but how to choose the best Technician from them? Let’s get to that now.

Reputation and Customer Service (Read Online Reviews)

Online reviews are one of the best ways to learn about the customer service you will receive. Read through the reviews in the “Customer Reviews” section on the website you visit. 

Check thoroughly for the ratio between positive and negative reviews. The more reviews you’ll read, the more precise the picture will get. Remember that positive reviews can be fake and uploaded by the company itself. Hence, you shouldn’t read only the positives, but also the negatives and make the final call.

Also, read how the company responds to negative reviews. You’ll know how professional the company is through the way they respond.

Range of Expertise

Look for a range of expertise in a technician when searching for them. A technician cannot possibly be a Jack of all trades. However, looking for a technician who can specifically work for your appliance’s brand is essential. Hiring a technician with limited expertise can be a nightmare for your appliance, therefore, check thoroughly.

Not only this, but the appliance’s model and brand also matter. Let’s suppose you need a repair for your fridge in Ontario. In that case, you would want the model of the fridge to be consistent with the technician’s expertise. If you don’t confirm this, it might cause further problems to your fridge. 

Ask for Referrals

Ask your family members or friends which appliance repair technician they call when they need one.

You can ask them to recommend one to you and ask for reviews. Friends and Family are a great way to get unbiased reviews.

Here’s a list of questions you can ask about the Technician:

• How professional and efficient is the technician?
• Would you use the same technician if you ran into a problem again?
• Does the technician work overnight?
• How much time did the technician take to reach your place?
• What is the technician’s per-hour charge?

Check Certification and Insurance

Checking the credentials of your Appliance Repair Technician is very important. Also, look for proof of certification. Certification testifies to the Technician being an expert in fixing your appliance. It also ensures that the Technician is well-versed and has undergone all the necessary training. 

Check for Insurance, as it protects you from liability during appliance repair. You’re also protected from any legal damages in case of accidents. 

Go for Local Repair Services over Large Companies

Most homeowners use domestic appliances and not industrial-sized machines, therefore, it’s better to use local repair services. These shops not only deliver quickly, but their services are more personalized too.

The best appliance repair technicians are from local stores in Ontario. Hence, many local stores hire technicians who are part of the community. This fosters familiarity and trust. 

Also, most local businesses are privately owned, giving them greater liberty. On the contrary, strict corporate policies are followed in big chains. Moreover, local companies rely on reputation, whereas big names rely on brand recognition. This makes the services offered by local companies much better and tailored to the specific needs of the community they serve.

Summing it all up

To sum it all up, proper repair is essential proper repair is essential to ensure the longevity of your appliances. By following the tips above, you can find the most reliable appliance repair technician in Ontario. Always remember that investing time and effort into finding the right Technician is essential. It ultimately saves you time, stress, and money in the long run.

The post How to find the best Appliance Repair Technician in Ontario? appeared first on Best Solution Appliance Repair.