One of the most useful appliances in your home is your dishwasher. Instead of spending hours on cleaning your dishwasher by hand, a dishwasher makes your life simpler. All you need to do is load up your dishes in the washer and it’ll get the job done.

You might see foam accumulation and soap residue being stuck even if you use high quality tablets. When the dishwasher tablets are not properly dissolved, you face this issue.

If you see the same issue with your dishwasher, it is essential that you investigate and get to the root of the issue. This article will explain how to resolve this issue with your dishwasher. It is important that you promptly address this issue to ensure that your dishwasher performs optimally.

How does a dishwasher work?

It is important that you understand how a dishwasher works before your start fixing the problem. Once you understand the working, you’ll be better equipped to diagnose and fix the issue with your dishwasher. 

A dishwasher uses high pressure washer jets to clean the dishes. It mixes the detergent with clean water and the mixed water is then sprayed on the dishes. The high pressure removes the grease and dirt on the dishes. 

Hot water is sprayed on the dishes from the rotating dishwasher arms. Hot water helps in dissolving the detergent while washer jets clean the dishes.

When the wash cycle starts, detergent tablets are dropped by the detergent door. The detergent door opens at a pre-established time. When the tablets drop to  the bottom of the washer, they dissolve. The tablets mix with the water, creating a lathery texture. The drain in the washer sucks this lathery mixture which is then pumped into the spinning arms of the washer before being deployed by the washer jets. 

6 possible reasons for your dishwasher tablets not dissolving

1. Dishwasher pods not dissolving

You should keep the detergent’s dispenser area clean. If any detergent or food particles end up getting stuck there, the residue can cause the dishwasher tablets to get stuck.

Also ensure that your dispenser tray is completely dry before you put the tablets inside it. The moisture in the tray can cause the tablets to clump together.

When the cycle is about to start, load the detergent just before it does. Detergent may stick or clump together if it is kept in there for too long before the cycle starts. This makes it harder for the tablets to dissolve effectively, limiting the washer’s cleaning ability.

2. Dispenser is damaged

Your dispenser may be damaged as well. Detergent may not be released immediately in the washer if the door is faulty. Check your door and see if it isn’t opening as it should. If so, the dispenser may be damaged.

3. Spray arms are not functioning properly

If the spray arms in the washer are not working properly, water distributed in the washer is not sufficient. This causes the tablets to not dissolve properly, resulting in an inefficient cycle.

It is essential that the spray arms rotate properly. These ensure that the detergent dissolves properly allowing the dishes to be cleaned effectively

Look for any other damage or crack in the spray arms. Soap residue or food particles can block the nozzle. To clear the blockage, clean the nozzle thoroughly 

4. Pressure of water is low

Your dishes won’t be cleaned properly if the water pressure is low. This is a clear indication of water pressure being low. Moreover, ensure that the inlet pipe to the dishwasher is not damaged.

5. Water temperature is low

Inadequate water temperature may be another reason for tablets not dissolving. Hot water helps the tablets dissolve. To check if water temperature is the problem, run the wash cycle at a higher temperature cycle. If the issue still persists, we recommend that you consult an expert.

6. Detergent door is blocked

Your detergent door may be blocked by a heavy object like a pan or a pot. Your detergent tablets will not be dropped at the washer’s bottom if the door doesn’t open. This does not dissolve the tablets completely. 

Summing it all up, it is easier to fix the issue once you identify its cause. Keep your dispenser dry and clean, load tablets before you start the cycle and don’t block the door. Ensure that spray arm is not clogged, washer runs on good pressure and high temperature. Start with hot tap water as hot water plays a major role. Address all the issues discussed in this blog to fix the issue. Ensure that you practice these habits regularly to ensure your dishwasher works at its best.

We know that feeling when we come home and the pleasant smell of home-cooked food comes from the kitchen. It often happens that the kitchen is filled with smoke instead of a pleasant smell. Smoke is not healthy and even dangerous. A over-the-range hood is a must-have kitchen appliance. It quickly and efficiently cleans the air from oil fumes and burning smells while cooking. 

In this article you can learn how to extend the hoods life , to keep the air quality in good condition. 

The first and most essential thing is to unplug your range hood. 

PREPARE YOUR CLEANING TOOLS

• Baking soda 
• Gloves 
• Hot water 
• A bowl 
• Vinegar 
• Detergent ( or any other cleaning liquid) 
• Grease remover spray 
• A cleaning soft brush 
• A cleaning scrubbing brush 
• Kitchen towel 

START THE OVER-THE-RANGE HOOD CLEANING 

We recommend to place some towel on your cooking panel under the hood, to prevent any dirt coming from the range hood . 

In the next step, use the dry brush and remove the dust as much as possible from the range hood. 

CLEAN THE RANGE HOOD SURFACE 

Mix in the warm water with the soap cleaner.  Use the scrubbing brush and wipe the surface.  Spray the vinegar all over the surface and wipe it with a soft kitchen cloth; it will help to give it a good, shiny finish. 

F.Y.I. Salting lemon or lime, as well as special household chemicals, will help eliminate bad smell.

CLEAN THE FILTER 

Most people, don’t pay attention to the hood filter . We highly recommend doing this, so your hood will last you for many years.

• Carefully remove the filter according to the instructions for your exact range hood make and model. 
• Leave the filter in a sink filled with hot water and a dish cleaner soap or any grease remover. 
• Sponge gently the filter with a scrubbing brush for the both sides . After all dirt removal, leave the filter in the soapy water for 10 minutes . 
• Rinse it thoroughly with warm water, and make sure you remove all soap residue. 
• Dry the filter thoroughly using a hair dryer, and leave it outside under the sun if the weather is warm and sunny.
• Install the filter back into your hood according to the manufacturer’s instructions. 

As professionals, we suggest to come back to this process every 2-3 months. 

By following our advice, your kitchen hood will always remain on the move and will serve you for many years to come. And in the kitchen there will be only a pleasant smell and nice fresh air.

The post Dishwasher Tablet Not Dissolving? Here’s What It Means appeared first on Best Solution Appliance Repair.

In this article you can learn how to extend the hoods life , to keep the air quality in good condition. 

The first and most essential thing is to unplug your range hood. 

PREPARE YOUR CLEANING TOOLS

• Baking soda 
• Gloves 
• Hot water 
• A bowl 
• Vinegar 
• Detergent ( or any other cleaning liquid) 
• Grease remover spray 
• A cleaning soft brush 
• A cleaning scrubbing brush 
• Kitchen towel 

START THE OVER-THE-RANGE HOOD CLEANING 

We recommend to place some towel on your cooking panel under the hood, to prevent any dirt coming from the range hood . 

In the next step, use the dry brush and remove the dust as much as possible from the range hood. 

CLEAN THE RANGE HOOD SURFACE 

Mix in the warm water with the soap cleaner.  Use the scrubbing brush and wipe the surface.  Spray the vinegar all over the surface and wipe it with a soft kitchen cloth; it will help to give it a good, shiny finish. 

F.Y.I. Salting lemon or lime, as well as special household chemicals, will help eliminate bad smell.

CLEAN THE FILTER 

Most people, don’t pay attention to the hood filter . We highly recommend doing this, so your hood will last you for many years.

• Carefully remove the filter according to the instructions for your exact range hood make and model. 
• Leave the filter in a sink filled with hot water and a dish cleaner soap or any grease remover. 
• Sponge gently the filter with a scrubbing brush for the both sides . After all dirt removal, leave the filter in the soapy water for 10 minutes . 
• Rinse it thoroughly with warm water, and make sure you remove all soap residue. 
• Dry the filter thoroughly using a hair dryer, and leave it outside under the sun if the weather is warm and sunny.
• Install the filter back into your hood according to the manufacturer’s instructions. 

As professionals, we suggest to come back to this process every 2-3 months. 

By following our advice, your kitchen hood will always remain on the move and will serve you for many years to come. And in the kitchen there will be only a pleasant smell and nice fresh air.

The post Why it is important to keep your over-the-range hood clean appeared first on Best Solution Appliance Repair.