One of the most useful appliances in your home is your dishwasher. Instead of spending hours on cleaning your dishwasher by hand, a dishwasher makes your life simpler. All you need to do is load up your dishes in the washer and it’ll get the job done.

You might see foam accumulation and soap residue being stuck even if you use high quality tablets. When the dishwasher tablets are not properly dissolved, you face this issue.

If you see the same issue with your dishwasher, it is essential that you investigate and get to the root of the issue. This article will explain how to resolve this issue with your dishwasher. It is important that you promptly address this issue to ensure that your dishwasher performs optimally.

How does a dishwasher work?

It is important that you understand how a dishwasher works before your start fixing the problem. Once you understand the working, you’ll be better equipped to diagnose and fix the issue with your dishwasher. 

A dishwasher uses high pressure washer jets to clean the dishes. It mixes the detergent with clean water and the mixed water is then sprayed on the dishes. The high pressure removes the grease and dirt on the dishes. 

Hot water is sprayed on the dishes from the rotating dishwasher arms. Hot water helps in dissolving the detergent while washer jets clean the dishes.

When the wash cycle starts, detergent tablets are dropped by the detergent door. The detergent door opens at a pre-established time. When the tablets drop to  the bottom of the washer, they dissolve. The tablets mix with the water, creating a lathery texture. The drain in the washer sucks this lathery mixture which is then pumped into the spinning arms of the washer before being deployed by the washer jets. 

6 possible reasons for your dishwasher tablets not dissolving

1. Dishwasher pods not dissolving

You should keep the detergent’s dispenser area clean. If any detergent or food particles end up getting stuck there, the residue can cause the dishwasher tablets to get stuck.

Also ensure that your dispenser tray is completely dry before you put the tablets inside it. The moisture in the tray can cause the tablets to clump together.

When the cycle is about to start, load the detergent just before it does. Detergent may stick or clump together if it is kept in there for too long before the cycle starts. This makes it harder for the tablets to dissolve effectively, limiting the washer’s cleaning ability.

2. Dispenser is damaged

Your dispenser may be damaged as well. Detergent may not be released immediately in the washer if the door is faulty. Check your door and see if it isn’t opening as it should. If so, the dispenser may be damaged.

3. Spray arms are not functioning properly

If the spray arms in the washer are not working properly, water distributed in the washer is not sufficient. This causes the tablets to not dissolve properly, resulting in an inefficient cycle.

It is essential that the spray arms rotate properly. These ensure that the detergent dissolves properly allowing the dishes to be cleaned effectively

Look for any other damage or crack in the spray arms. Soap residue or food particles can block the nozzle. To clear the blockage, clean the nozzle thoroughly 

4. Pressure of water is low

Your dishes won’t be cleaned properly if the water pressure is low. This is a clear indication of water pressure being low. Moreover, ensure that the inlet pipe to the dishwasher is not damaged.

5. Water temperature is low

Inadequate water temperature may be another reason for tablets not dissolving. Hot water helps the tablets dissolve. To check if water temperature is the problem, run the wash cycle at a higher temperature cycle. If the issue still persists, we recommend that you consult an expert.

6. Detergent door is blocked

Your detergent door may be blocked by a heavy object like a pan or a pot. Your detergent tablets will not be dropped at the washer’s bottom if the door doesn’t open. This does not dissolve the tablets completely. 

Summing it all up, it is easier to fix the issue once you identify its cause. Keep your dispenser dry and clean, load tablets before you start the cycle and don’t block the door. Ensure that spray arm is not clogged, washer runs on good pressure and high temperature. Start with hot tap water as hot water plays a major role. Address all the issues discussed in this blog to fix the issue. Ensure that you practice these habits regularly to ensure your dishwasher works at its best.

We know that feeling when we come home and the pleasant smell of home-cooked food comes from the kitchen. It often happens that the kitchen is filled with smoke instead of a pleasant smell. Smoke is not healthy and even dangerous. A over-the-range hood is a must-have kitchen appliance. It quickly and efficiently cleans the air from oil fumes and burning smells while cooking. 

In this article you can learn how to extend the hoods life , to keep the air quality in good condition. 

The first and most essential thing is to unplug your range hood. 

PREPARE YOUR CLEANING TOOLS

• Baking soda 
• Gloves 
• Hot water 
• A bowl 
• Vinegar 
• Detergent ( or any other cleaning liquid) 
• Grease remover spray 
• A cleaning soft brush 
• A cleaning scrubbing brush 
• Kitchen towel 

START THE OVER-THE-RANGE HOOD CLEANING 

We recommend to place some towel on your cooking panel under the hood, to prevent any dirt coming from the range hood . 

In the next step, use the dry brush and remove the dust as much as possible from the range hood. 

CLEAN THE RANGE HOOD SURFACE 

Mix in the warm water with the soap cleaner.  Use the scrubbing brush and wipe the surface.  Spray the vinegar all over the surface and wipe it with a soft kitchen cloth; it will help to give it a good, shiny finish. 

F.Y.I. Salting lemon or lime, as well as special household chemicals, will help eliminate bad smell.

CLEAN THE FILTER 

Most people, don’t pay attention to the hood filter . We highly recommend doing this, so your hood will last you for many years.

• Carefully remove the filter according to the instructions for your exact range hood make and model. 
• Leave the filter in a sink filled with hot water and a dish cleaner soap or any grease remover. 
• Sponge gently the filter with a scrubbing brush for the both sides . After all dirt removal, leave the filter in the soapy water for 10 minutes . 
• Rinse it thoroughly with warm water, and make sure you remove all soap residue. 
• Dry the filter thoroughly using a hair dryer, and leave it outside under the sun if the weather is warm and sunny.
• Install the filter back into your hood according to the manufacturer’s instructions. 

As professionals, we suggest to come back to this process every 2-3 months. 

By following our advice, your kitchen hood will always remain on the move and will serve you for many years to come. And in the kitchen there will be only a pleasant smell and nice fresh air.

The post Dishwasher Tablet Not Dissolving? Here’s What It Means appeared first on Best Solution Appliance Repair.

In this article you can learn how to extend the hoods life , to keep the air quality in good condition. 

The first and most essential thing is to unplug your range hood. 

PREPARE YOUR CLEANING TOOLS

• Baking soda 
• Gloves 
• Hot water 
• A bowl 
• Vinegar 
• Detergent ( or any other cleaning liquid) 
• Grease remover spray 
• A cleaning soft brush 
• A cleaning scrubbing brush 
• Kitchen towel 

START THE OVER-THE-RANGE HOOD CLEANING 

We recommend to place some towel on your cooking panel under the hood, to prevent any dirt coming from the range hood . 

In the next step, use the dry brush and remove the dust as much as possible from the range hood. 

CLEAN THE RANGE HOOD SURFACE 

Mix in the warm water with the soap cleaner.  Use the scrubbing brush and wipe the surface.  Spray the vinegar all over the surface and wipe it with a soft kitchen cloth; it will help to give it a good, shiny finish. 

F.Y.I. Salting lemon or lime, as well as special household chemicals, will help eliminate bad smell.

CLEAN THE FILTER 

Most people, don’t pay attention to the hood filter . We highly recommend doing this, so your hood will last you for many years.

• Carefully remove the filter according to the instructions for your exact range hood make and model. 
• Leave the filter in a sink filled with hot water and a dish cleaner soap or any grease remover. 
• Sponge gently the filter with a scrubbing brush for the both sides . After all dirt removal, leave the filter in the soapy water for 10 minutes . 
• Rinse it thoroughly with warm water, and make sure you remove all soap residue. 
• Dry the filter thoroughly using a hair dryer, and leave it outside under the sun if the weather is warm and sunny.
• Install the filter back into your hood according to the manufacturer’s instructions. 

As professionals, we suggest to come back to this process every 2-3 months. 

By following our advice, your kitchen hood will always remain on the move and will serve you for many years to come. And in the kitchen there will be only a pleasant smell and nice fresh air.

The post Why it is important to keep your over-the-range hood clean appeared first on Best Solution Appliance Repair.

Fixing these is tedious and can be uncomfortable, especially if you use the appliance daily. You will therefore, need an expert Appliance Repair Technician to resolve the issue. 

Finding an expert Appliance repair technician in Ontario is another tedious task and we’re here to make it easier for you. Let’s get to it!

A reliable and a competent technician is a must to ensure your appliance is completely fixed. The process may be time-consuming, but trust us, it’s completely worth it. Below are a few things you should consider before choosing a technician. 

Plan Ahead

Carry out frequent maintenance checks on your home appliances. This will help you spot any appliance issues that you can address promptly.

Stay ahead of the curve by finding Ontario’s best appliance repair technicians. It’s also essential to get familiarised with their services and quotes beforehand. This will save you time and prepare you for any unforeseen malfunctions.

Take your Time

You never know what might happen the very next moment in life. The same is true with malfunctions; you never know when it will happen. 

In case of a malfunction, our brain sends us into panic mode. The trick here is to calm down, analyse the situation, and look for an appliance repair technician.

Having an emergency contact for a technician would be ideal. If you don’t have one, don’t worry; you can find one online. Search through different quotes and services and then make a decision. It’s also essential to take your time here and then decide. No one wants a technician who further ruins the situation, so choose wisely. 

How do you choose the most suitable Appliance repair technician in Ontario?

Searching Online

The internet has to be the most diverse place for anything you need. You can get information through any website you visit and see if it works for you. For example, you can type “Best Appliance Repair Technician for me in Ontario” and get many results. 

An internet search will generate a lot of results, but how to choose the best Technician from them? Let’s get to that now.

Reputation and Customer Service (Read Online Reviews)

Online reviews are one of the best ways to learn about the customer service you will receive. Read through the reviews in the “Customer Reviews” section on the website you visit. 

Check thoroughly for the ratio between positive and negative reviews. The more reviews you’ll read, the more precise the picture will get. Remember that positive reviews can be fake and uploaded by the company itself. Hence, you shouldn’t read only the positives, but also the negatives and make the final call.

Also, read how the company responds to negative reviews. You’ll know how professional the company is through the way they respond.

Range of Expertise

Look for a range of expertise in a technician when searching for them. A technician cannot possibly be a Jack of all trades. However, looking for a technician who can specifically work for your appliance’s brand is essential. Hiring a technician with limited expertise can be a nightmare for your appliance, therefore, check thoroughly.

Not only this, but the appliance’s model and brand also matter. Let’s suppose you need a repair for your fridge in Ontario. In that case, you would want the model of the fridge to be consistent with the technician’s expertise. If you don’t confirm this, it might cause further problems to your fridge. 

Ask for Referrals

Ask your family members or friends which appliance repair technician they call when they need one.

You can ask them to recommend one to you and ask for reviews. Friends and Family are a great way to get unbiased reviews.

Here’s a list of questions you can ask about the Technician:

• How professional and efficient is the technician?
• Would you use the same technician if you ran into a problem again?
• Does the technician work overnight?
• How much time did the technician take to reach your place?
• What is the technician’s per-hour charge?

Check Certification and Insurance

Checking the credentials of your Appliance Repair Technician is very important. Also, look for proof of certification. Certification testifies to the Technician being an expert in fixing your appliance. It also ensures that the Technician is well-versed and has undergone all the necessary training. 

Check for Insurance, as it protects you from liability during appliance repair. You’re also protected from any legal damages in case of accidents. 

Go for Local Repair Services over Large Companies

Most homeowners use domestic appliances and not industrial-sized machines, therefore, it’s better to use local repair services. These shops not only deliver quickly, but their services are more personalized too.

The best appliance repair technicians are from local stores in Ontario. Hence, many local stores hire technicians who are part of the community. This fosters familiarity and trust. 

Also, most local businesses are privately owned, giving them greater liberty. On the contrary, strict corporate policies are followed in big chains. Moreover, local companies rely on reputation, whereas big names rely on brand recognition. This makes the services offered by local companies much better and tailored to the specific needs of the community they serve.

Summing it all up

To sum it all up, proper repair is essential proper repair is essential to ensure the longevity of your appliances. By following the tips above, you can find the most reliable appliance repair technician in Ontario. Always remember that investing time and effort into finding the right Technician is essential. It ultimately saves you time, stress, and money in the long run.

The post How to find the best Appliance Repair Technician in Ontario? appeared first on Best Solution Appliance Repair.